Compound Bow Draw Length Adjustment

Compound Bow Draw Length Adjustment. Use a measuring tape, and measure the length between the marking made and the throat of the nock. Using a hexagonal wrench or an allen wrench, carefully loosen the bolts on the existing cams.

Project Gridless How to Adjust the Draw Length on a Vintage Compound Bow from www.projectgridless.ca

This is the distance you should adjust. As a general rule, 1 of draw length is worth about 10 fps of arrow velocity. This is accomplished with the use of a bow scale.

Source: hunthacks.com

This is the distance you should adjust. This is accomplished with the use of a bow scale.

Source: www.youtube.com

Before adjusting your draw weight, it is always helpful to record your current draw weight for reference. Your measurement should be in inches.

Source: www.archerytalk.com

Then fill the hole with “jb weld” and let it dry. If your draw length is 32, 32/2.5 = 12.8 is your draw length.

Source: shootingcabin.com

That is how to convert centimeters to inches. Here is a list of the most common compound bow hardware components directly affecting draw length adjustment:

Source: www.icollector.com

As a general rule, 1 of draw length is worth about 10 fps of arrow velocity. For instance, on the left the hoyt powermax has two options available.

Source: www.projectgridless.ca

The range of draw length adjustment is different for every bow. Then fill the hole with “jb weld” and let it dry.

Source: shootingcabin.com

Gently lift up the cams off the risers. Adjustable cams allow the archer to adjust his or her draw length with the use of an hexagonal wrench without, in most cases, pressing the compound bow.

Source: www.youtube.com

Once you have your arms in a straight line, have your helper measure the distance from fingertip to fingertip. Take whatever figure you get to be your draw length.

Source: www.youtube.com

Secure the bow in a position that is comfortable to work on. To do this, first straighten out your arms from your shoulders with palms out.

Source: shootingcabin.com

Once you know your draw length, you can find it’s corresponding number on the bear compound bow cam. How to adjust draw length on old compound bow.

Source: unitedbow.com

This is the distance you should adjust. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches.

Source: whitegekko.com

Divide the length measure by 2.5, and you have your draw length. Your measurement should be in inches.

Unstring The Bow And Remove Both The Bus Cable And The Control Cable (S).

Take that number and divide by 2.5; Find your draw length number. It is important for archers to know how to adjust a compound bow so that it can be able to meet their specific shooting needs.

Stand Against A Wall With Your Arms Stretched Out Against The Wall.

If you have a shorter draw length, you’ll need to pull your arrow farther back. Adjustable compound bow cams allow archers to adjust anywhere from 3 inches up to 13 inches. So if your arm span is calculated to be 70″, divide that by 2.5 and you get 28.

Divide The Length Measure By 2.5, And You Have Your Draw Length.

Place the new cams on the risers according to the manufacturer’s installation instructions and tighten the bolts. Check your current draw weight. As a general rule, 1 of draw length is worth about 10 fps of arrow velocity.

To Do This, You Need To Purchase A 3/16 Drill Bit.

This allows you to pinpoint what your new weight should be set at in order to achieve the desired result. Your measurement should be in inches. This is the hardest part.

This Is The Distance You Should Adjust.

This is accomplished with the use of a bow scale. Now remove the arrow from the bow and replace it in the bow’s magazine. Like, comment, share, and subscribe for more!